Own this product? Write a review!
This big Christmas tree stand can handle trees from 13-20 feet tall and trunk diameters up to 10". With a water reservoir that holds 4 gallons, you won't have to worry about your tree drying out! The stand also features a wide 62" stance for stability, and at a whopping 66 pounds, you can be sure that this stand will support your large tree without a problem.
Features:
- Holds trees up to 20 feet tall
- Maximum trunk diameter 10"
- 4 Gallon water reservoir
Specifications:
- Maximum Tree Size: 20 feet high x 10" maximum diameter trunk
- Weight: 66 lbs with legs
- Stance (widest dimension): 62"
- Materials: 1/4" thick steel for the reservoir, feet are 1-1/2" x 1-1/2" x 1/8" thick square steel tubing
- Water Reservoir holds appx. 4 gallons
- Ships via FedEx Ground from Bear Lake, Michigan
12XTS Assembly Instructions:
You will need help with this size of tree and stand, so be sure to have several people to help. There should be 9 parts to your stand. The main bowl, 4 T-handles, and 4 legs.
Step By Step Instructions:
- After making a 2" fresh cut off of the bottom of your tree, drill a 3/4'' diameter hole approximately 2 inches deep in the bottom center of the tree trunk.
- Lay the tree down on its side flat.
- Lay bowl of the stand on it's side.
- Make sure that the lag bolt in the bottom of the stand is inserted into the hole that you drilled in the trunk of the tree.
- Tighten the 4 T-handles.
- Install 2 legs on the stand with the legs sticking up, DO NOT USE THEM AS LEVERS.
- Stand the tree upright, insert the other 2 legs.
- Tighten the tree securely and you should be all set. You should arrange your decorations evenly all the way around the tree to keep the tree balanced. Enjoy a safe holiday!
Free Ground shipping for contiguous United States (lower 48 states) only. Sorry, we do not ship outside the contiguous United States (lower 48 states).
